Table of Contents
3D-Printing the Enclosure
https://codeberg.org/opentrafficmap/its-g5-receiver/src/branch/main/case
We recommend printing the enclosure in ASA, which should make it UV-resistant and waterproof. ASA is UV-resistant without any special additives, so the filament manufacturer shouldn't really matter. We always buy the cheapest one in white.
Required materials
| Quantity | Item |
|---|---|
| 3 | M3 heat-set inserts |
| 2 | M4 heat-set inserts |
| 3 | M3 × 4 mm button-head or socket-head cap screws |
| 2 | M4 × 8 mm button-head or socket-head cap screws |
Images
 |  |  |
 |  |  |
 |  |  |