This is an old revision of the document!

3D-Printing the Enclosure

https://codeberg.org/opentrafficmap/its-g5-receiver/src/branch/main/case

We recommend printing the enclosure in ASA, which should make it UV-resistant and waterproof. ASA is UV-resistant without any special additives, so the filament manufacturer shouldn't really matter. We always buy the cheapest one in white.

Required materials

Quantity	Item
3	M3 heat-set inserts
2	M4 heat-set inserts
3	M3 × 4 mm button-head or socket-head cap screws
2	M4 × 8 mm button-head or socket-head cap screws