Differences

This shows you the differences between two versions of the page.

--- en:hardware:setups [2026/08/14 16:45] – mobile Setup withj Mikrotik thomas585
+++ en:hardware:setups [2026/09/01 10:32] (current) – added my setup, changed the headings a bit xanadu
@@ Line 3: / Line 3: @@
 ===== OpenTrafficMap Node/Receiver =====
-==== USB + LAN ====
+==== Fixed Setups ====
-==== IEEE 802.3af PoE ====
+=== IEEE 802.3af PoE ===
   * PoE jumper in position ''802.3af''
@@ Line 12: / Line 12: @@
 {{:opentrafficmapnode-mate-poe.jpg?400|}}
-==== Passive PoE ====
+== Passive PoE ==
   * PoE jumper in position ''passive''
-====== DIY Receivers ======
+==== Mobile Setups ====
-===== Mobile Setups =====
+=== Ethernet-Adapter ===
-==== FireBeetle 2 ESP32-C5 + W5500 + power bank + ZTE MU5001 HyperMobile 5G ====
+{{:en:hardware:signal-2026-09-01-09-58-36-214_003.jpg?direct&400|}}
+== Hardware ==
+  * OTM-Node
+  * Powerbank
+  * USB-C to Ethernet cable (for example https://www.amazon.de/dp/B0DDKPSNBQ
+  * USB-C cable
+  * Case/pouch with 2 compartments - one for the OTM-Node the other for the powerbank
+  * Optional: USB-C OTG Adapter to connect the OTM-Node and charge the smartphone simultaneously (for example https://www.amazon.de/dp/B0DCBNGXKG)
+  * Optional: additional USB-C-cable
+== Connection ==
+  * OTM-Node <-> USB-C-Ethernet-Cable <-> smartphone
+  * OTM-Node <-> powerbank
+  * Optional: powerbank <-> OTG-Adatper <-> smartphone
+No additional software required, activate on Android "Ethernet Tethering" in network settings. Option becomes available after connecting the cable/adapter.
+{{:en:hardware:signal-2026-09-01-09-58-36-214_002.jpg?direct&400|}}{{:en:hardware:signal-2026-09-01-09-58-36-214_004.png?direct&400|}}
+===== DIY Receivers =====
+==== Fixed Setups ====
+==== Mobile Setups ====
+=== FireBeetle 2 ESP32-C5 + W5500 + power bank + ZTE MU5001 HyperMobile 5G ===
 Mobile setup with a 5G router that has an Ethernet port
@@ Line 26: / Line 53: @@
 {{::firebeetle-2-esp32-c5-w5500-powerbank-mu5001-mobile-setup.jpg?400|}}
-==== Node + Mikrotik mAP lite + mobile Phone ====
+=== Node + Mikrotik mAP lite + mobile Phone ===
 The Mikrotik mAP lite (https://mikrotik.com/product/RBmAPL-2nD) provides a Wi-Fi uplink to a mobile phone (tethering), offers Ethernet for the board, and additionally creates a Wi-Fi access point (AP) for network access. The "AP" LED indicates the connection to the MQTT server. Power is supplied to both via USB or USB-C from a power bank.